
Original: $191.28
-70%$191.28
$57.38The Story
10A Standard Power Conditioner w/Lights, 230V
Install an M-10Lx E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. Illuminate your rack with two retractable, front panel lights.
Description
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. The M-10Lx E features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.
Applications
INSTRUMENT RIGS
Youâve got a rack for your effects, preamps, tunerâŠYouâre going to plug that into the wall? One big spike and your rig is up in smoke. Furmanâs standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furmanâs standard level RFI/EMI filtration, youâll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on.
RECORDING
Canât track down where that noise is coming from? Your mix sounding flat? With Furmanâs standard level RFI/EMI filtration youâll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furmanâs standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, itâs enough to power your whole home studio.
DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power out there â from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furmanâs standard level protection and filtration keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.
PRO AUDIO
When youâre out there gigging, you never know what kind of power youâre going to get. The wear and tear on mobile rigs eventually takes it toll â thatâs why itâs smart to plug into Furmanâs standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether youâre setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Features
- Noise Filtration
- Surge Protection
- 11 Total Outlets
- 10 Amp Rating
- âProtection OKâ Indicator
- Front Panel Pull-out Lights
Other Specifications
- General
-
- Family- Merit Series 240V
- Line Voltage240 (Volts)
- Shipping Info
-
- Length21.75 (Inches)
- Width12.5 (Inches)
- Height3.5 (Inches)
- Weight7.8 (Lbs)
- Unit of MeasureEach
- UPC654061028048
- Master Pack Qty6

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
10A Standard Power Conditioner w/Lights, 230V
Install an M-10Lx E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. Illuminate your rack with two retractable, front panel lights.
Description
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. The M-10Lx E features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.
Applications
INSTRUMENT RIGS
Youâve got a rack for your effects, preamps, tunerâŠYouâre going to plug that into the wall? One big spike and your rig is up in smoke. Furmanâs standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furmanâs standard level RFI/EMI filtration, youâll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on.
RECORDING
Canât track down where that noise is coming from? Your mix sounding flat? With Furmanâs standard level RFI/EMI filtration youâll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furmanâs standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, itâs enough to power your whole home studio.
DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power out there â from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furmanâs standard level protection and filtration keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.
PRO AUDIO
When youâre out there gigging, you never know what kind of power youâre going to get. The wear and tear on mobile rigs eventually takes it toll â thatâs why itâs smart to plug into Furmanâs standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether youâre setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Features
- Noise Filtration
- Surge Protection
- 11 Total Outlets
- 10 Amp Rating
- âProtection OKâ Indicator
- Front Panel Pull-out Lights
Other Specifications
- General
-
- Family- Merit Series 240V
- Line Voltage240 (Volts)
- Shipping Info
-
- Length21.75 (Inches)
- Width12.5 (Inches)
- Height3.5 (Inches)
- Weight7.8 (Lbs)
- Unit of MeasureEach
- UPC654061028048
- Master Pack Qty6
























